類別:撥碼開關
型號:貼片開關系列(DMH series)
間距:2.54mm
材質說明(Materials) | ||
撥柄(Button) | PA46 UL 94V-0 白色(white) | |
蓋板(Cover) | PA9T UL 94V-0 黑色(Black) | |
本體(Base) | PA9T UL 94V-0 黑色(Black) | |
端子(Terminal) | 磷青銅,鍍金(Copper Alloy with Gold Plated) | |
彈片觸點(Movable Contact) | 鈹青銅,鍍金(Beryllium copper Alloy with Gold Plated) | |
性能說明(Specifications) | ||
額定電流(Contact Rating) | 常開關狀態下(Switching) 25mA,24VDC | 不常開關狀下(Non-Switching) 100mA,50VDC |
接觸電阻(Contact Resistance) | 初始值(lnitial) 50mΩ Max | 測試后(After Life Text) 100mΩ Max |
絕緣電阻(Insulation Resistance) | 100MΩ Min at 500VAC | |
耐壓(Dielectric Strength) | 300VAC/1 minute | |
撥動力(Operating Force) | 800g Max | |
撥動行程(Stroke) | 0.6mm | |
機械壽命(Mechanical Life) | 5000 cycles | |
電氣壽命(Electrical Life) | 3000 cycles | |
使用溫度(Operation Temperature) | -40℃~+85℃ | |
儲存溫度(Storage Temperature) | -40℃~+85℃ |
包裝資料(Packing) | ||||||||||
以上產品皆以載帶形式包裝(All DIP Switches are shipped in rell) | ||||||||||
開關位數 (POLES) | 02P | 03P | 04P | 05P | 06P | 07P | 08P | 09P | 10P | 12P |
每卷數量 (PER REEL) | 1000 |
焊接(Soldering Information) | ||
在所有操作過程前,請保持開關在“off”位置(Keep all switch contacts in their "off"position for all operations) | ||
手工焊接(Hand Soldering) | 使用30瓦烙鐵控制溫度在320℃,焊接時間3秒內 (Soldering iron 30W or under at 320℃ for 3 sec. max) | |
波峰焊(Wave Soldering) | 推薦焊錫溫度在250土5℃,3~5秒鐘 (Rencommended Solder Temperature at 260℃ max. 5 seconds for IC type) | |
回流焊(Reflow Soldering) | 回流爐最高溫度為260℃,溫度為240℃時,最長時間不超過20秒 (The maximum temperature of reflow furnace is 260℃,Reflow zone 240° C for 20 seconds) |
寧波新聯電子有限公司
Ningbo Xinlian Electronics Co., Ltd.
新聯電子始終為客戶提供優質的產品、良好的技術支持和健全的售后服務。熱忱歡迎您前來參觀、洽談業務。